Air Line Accessories

Owing to our wide industrial expertise, we are capable of manufacturing and supplying finest grade Filter Regulator – Combination. This compactly shaped filter regulator is equipped with press to lock knob which is the widely trusted method to conveniently set the air pressure. High in demand for its efficient moisture separation the offered regulator is combination type equipment which is supplied with pressure gauge & wall mounting bracket at a market leading price.

Features:
 

• Max. pressure 145 PSI (10 BAR)
• 40 micron sintered bronze filter
• Semi automatic drain type

Applications:
 

• Regulation of air pressure in airline tools
• Removal of contaminants and moisture  from compressed air

We are reputed manufacturer and supplier of highly efficient Filter Regulator & Lubricator 2 Pc. This is a combination and lubricator equipment widely demanded for its efficient to maintain constant air to oil density. Uniquely designed with non raising adjusting knob the offered device is equipped with semi automatic drain type. Further, our prestigious clients can order this high performing regulator with pressure gauge and mounting brackets at the best price in the industry.

Features:
 

• Max. pressure 145 PSI (10 BAR)
• Wide range of flow
• Space saving design
• Maintenance free

Applications:
 

• Suitable for air operated equipments

Metal Digital Calipers with
dual mode measurement 
system – inches & mm
Rugged, stainless steel 
caliper body with zinc die 
cast display chamber
Large high contrast LCD 
digital readout
Delivers accurate readings of 
inside, outside, depth & step 
measurements
Freewheeling thumb roller 
mechanism for smooth 
movement along the linear 
scale
Convenient to use locking 
screw to set calipers at any 
desired position
Measurement can be zero 
set at any position along 
the scale for incremental 
measurements 
Extendable depth gauge for 
use in slots & small holes
In-built data output interface 
to transfer data to PC/Laptop 
etc.
Data cable not included
Version with IP67 level 
compliance also available

Includes 3V lithium battery
IP67 Compliant :
a. Ingress of dust will not 
adversely affect the caliper
b. Water splash will not 
adversely affect the caliper

features
resOlutiOn
0.01 mm /
0.0005"
accuracy
± 0.02 mm/
± 0.001"

Vernier Calipers with a large 
& clear dial read off 
Hardened stainless steel 
construction in satin chrome 
finish
Vernier scale etched 
with permanent black 
graduations allows precise & 
convenient reading
Covered rack prevents dirt & 
chips from entering the ‘rack 
& gear’ mechanism ensuring 
smooth operation
Free wheeling thumb roller 
mechanism for smooth 
movement along the linear 
scale
Convenient to use locking 
screw to set calipers at 
desired position; a feature 
very useful in applications 
requiring repetitive 
measurements
Suitable for inside, outside, 
depth & step measurements
Dial gauge has an adjustable 
bezel for zero setting

Balanced Frame Design : 
Balanced Frame Design :
Steel frame prevents flexing 
Steel frame prevents flexing 
ensuring greater accuracy 
ensuring greater accuracy 
in measurement. Can be 
in measurement. Can be 
operated efficiently with one 
operated efficiently with one 
hand
Non – wearing carbide 
tipped anvil & measuring 
tipped anvil & measuring 
faces ensure accurate 
measurements over a long 
measurements over a long 
period of time
Hardened spindle with 
precisely cut threads for 
precisely cut threads for 
smooth movement and high 
smooth movement and high 
accuracy
Satin chrome thimble and 
Satin chrome thimble and 
barrel with convenient 
to read deep etched 
graduations in black
Ratchet stop for exact 
repetitive measurements
Quick & easy zero 
adjustment with spanner 
wrench
Supplied with master on all 
sizes except 0-25 mm / 0-1"
Available in inch & metric 
models

features
resOlutiOn
0.01 mm /
0.0001"

Superior tool designed to 
measure, record & display 
dimensions in inches & mm
Balanced Frame Design: 
Steel frame prevents flexing 
ensuring greater accuracy in 
measurement. Insulation at 
top and bottom end of the 
frame safeguards against 
data distortion due to 
thermal expansion
Extra large, high contrast 
LCD digital read out
Non – wearing carbide 
tipped anvil & measuring 
faces ensure accurate 
measurements over a long 
period of time
Zero setting at any position 
along the scale
Two Measuring Modes : 
Absolute & Incremental
Unique Ball Attachment : 
Each piece comes with a 
standard ball attachment 
that converts a regular 
micrometer into a pipe 
micrometer, enabling 
measurement of pipes, 
tubes, etc.
Supplied with master on all 
sizes except 0-25mm / 0-1"
Integral data output interface 
to transfer data to PC / 
Laptop etc. Data cable not 
included
Comes complete with SR44 
battery
Data cable not included
Available in two variants : 
IP54 & IP65 level compliance

Metal Digital Depth Gauges
with dual mode measurement 
system - inches & mm
Large high contrast LCD digital 
readout
Free wheeling thumb roller 
mechanism for smooth 
movement along the linear scale
Integral data output interface to 
transfer data to PC/ Laptop
Data Cable not included
Measurement can be zero set at 
any position along the scale for 
incremental measurement
Base Width: 4" (100 mm)
Base Thickness: 9/32" (7.0 mm)
Convenient to use locking screw 
to set caliper at any desired 
position; a feature very useful in 
applications requiring repetitive 
measurements

features
resOlutiOn
0.01 mm/
0.0005"

Manufactured from
hardened stainless steel
Designed for measuring 
depths of holes, slots & 
recesses and for inspecting 
jigs, fixtures and die work
Vernier scale etched 
with permanent black 
graduations allows precise 
and convenient reading
Free wheeling thumb screw 
for smooth movement 
along the linear scale
Base Width: 100 mm
Base Thickness: 7.0 mm
Convenient to use locking 
screw to set calipers at 
desired position; a feature 
very useful in applications 
requiring repetitive 
measurements

Carbide Tipped Scriber offered features excellent carbide tip finish.

 

Features:

 

• Features aluminium body with carbide tip
• Point can be reversed into body for safety

 

Specifications:

 

• Replaceable point type
• Find usage in areas where high hardness and wear resistance is required
• High performance & wear parts
• Raw materials coming tested in terms of density, hardness
• Available in options of different grades
• Having standard hardness properties
• Coming produced with advanced equipments and process

An exceptional set which combines several tools,
substituting the use of try squares, miter, depth 
gauge, height gauge, marking gauge, level, plumb 
& a precision rule
Constructed from Quality Cast Iron & complete 
with precision rule 12" (300 mm) long
The individuals components of the Square are 
detailed as below:
Square Head: With a precision ground 90° square 
face & a 45° miter face. Highly versatile layout 
tool for scribing right angles & parallel lines. Also 
used as a measuring tool that can work as a try 
square, miter, depth gauge, height gauge & a level
Center Head: Used for accurately locating center 
of a cylindrical or square work piece
Protractor Head: Includes revolving turrets with 
direct reading double graduations from 0 to 180° 
in opposite directions. This permits accurate & 
quick direct reading of angles above or below the 
blade
Steel Rule: Precision Steel Rule with shoulder 
on one side. Rule is 300 mm long × 25 mm wide 
× 2 mm thick. Graduated with 0.50 mm & 32nds 
on one side & 1.0 mm & 64ths on the reverse side

Designed for use in measuring
bores of castings & inside reading 
in fabrications
These are used as comparison 
gauges & should be used with 
an absolute measurement device 
such as a micrometer, setting 
ring, etc.
Calipers are spring loaded & 
make point contact at constant 
measuring pressure
Available in inch & metric sizes
Dial gauge with adjustable bezel 
for zero setting

Ordering infOrmatiOn
Cat Nr. raNge H D BOX Qty.
IDC/1M - - 5
IDC/1 0.375 – 1.375 2 5
(mm) (inch) (mm) (inch) (mm) (inch)

A very versatile range of digital
indicators available in two levels 
of precision – Standard & High 
Accuracy
Robust construction
Suitable for both inch & metric 
measurements
Useful for absolute & tolerance 
measurement which allows for 
measure of upper & lower tolerances
Supplied with flat & lug back
Comes complete with CR 2032:3V 
battery

Feeler Gauges are used for
adjusting & gauging spark 
plugs, distributor points 
and valve clearances or any 
other instance of measuring 
space between two points
Stainless steel construction
with each leaf marked with 
its thickness
Lock nut secures one or 
more leaves in position and 
each leaf is detachable if 
necessary
Complete with a protective 
holder that helps to preserve 
trueness of the leaf edges

Radius Gauges are used by
tools & die-makers, machinist’s, 
screw machine operators 
& pattern makers to check 
layouts, radii of tools, dies & 
patterns
Useful for measuring external & 
internal radii
Stainless Steel construction 
with leaves etched with 
dimensions in millimetres
When not in use, the gauge 
can be rotated into the 
tools housing protecting the 
individual leaves
Locking nut holds gauge in 
open or closed position

Every day workshop use general 
purpose steel squares
Made from selected steel with 
hardened blades, these squares have 
accurate right angled both on the 
inside & outside
Both blade and stock are accurately 
ground which ensures straightness 
and parallelism
Ideal for everyday use in workshops 
and wood industry application

Amongst the oldest comparison measuring
tools these are designed for taking 
comparative measurements & transferring the 
dimensions to a Micrometer, Vernier Calliper, 
precision rule
Dividers are used for marking out circles on 
steel or transferring measurements from 
master templates.
Manufactured from high grade steel. Calipers 
& dividers have a spring joint for precision 
settings. Adjustments are made by opening & 
closing of legs via an adjusting nut
Divider points are hardened 50-55 HRC for 
increased wear resistance

Designed for versatility and accuracy, these
Vee Blocks are ideal for holding round 
or irregular shapes for scribing, grinding, 
measuring, machining and testing applications
All vee’s and faces can be energized or 
de-energised simultaneously by turning the 
rotary action control knob. Hence enabling 
it to hold itself and the work against any flat 
Ferrous surface
Brass knob ensures no interference with the 
magnetic field unlike the conventionally used 
steel knobs
Vee’s are hardened 55-60 HRC for increased 
wear resistance
Accuracies controlled within 8 microns

Sturdy cast iron base precisely
machined & ground
60mm Square Anvil hardened 
55-58 HRC with flatness 
controlled to within 2 microns
Very useful for making fast 
& accurate comparative 
measurements both in 
laboratories & mass production 
jobs

Rigid & robust magnetic 
bases with vee grooves that 
securely fasten onto round 
ferrous jobs or machine 
tables
Equipped with convenient 
ON/OFF control switch
Three precision ground 
magnetic surfaces 
allow these to be used 
horizontally, vertically or 
even upside down
Available in two versions:
1. Fixed arm type: 
Threaded M8 × 1.25
2. Articulating arm type: 
3 articulating joints 
lockable using a single 
knob. Suitable for 3/8” 
& 8 mm stems & test 
indicators with dovetail 
clamping mechanism

Knurling Tool Holders offered comprises chuck collect milling drilling machine knurling tool holders. Features: Available in different standard type options Coming in alloy steel based material Specifications: Suitable to be used in milling and drilling operations Carbon depth of 0.8mm0.2mm Fine balancing can be customized on demand Provide suitable usage for clamping tools with cylindrical shank in Collets Product comes with clamping nut support Available in 2 types: Knurling Tool Holder & Knurling Tool Holder

Time saving positioning tools
for use in jig, boring, milling 
machines etc.
Used for accurately locating 
work edges, shoulders and 
grooves
Manufactured from precision 
ground tool steel, case 
hardened to 45-48 HRC
Diameter & concentricity is 
controlled to within 5 microns.

We are fully devoted in manufacturing and supplying high quality Air Line Hose. Widely trusted for its superior performance in extreme temperature conditions the offered hose becomes one of the best selling accessories in the marketplace. With help of advanced manufacturing technology this precisely fabricated air line hose is developed using hose length of of 1.5 mm and 5mm. Featuring industry compliant construction the offered air line hose can be ordered with 10 per box quantity at a competitive price.

Features:
 

• 10 BAR working pressure
• Weather resistant
• 8 mm outer dia

Applications:
 

• Workshops
• Complex industrial usage

We have gained huge repute by manufacturing and supplying modern day One Touch Air Line Fitting. These quick couplers are trusted for the offered safety and convenient one touch operation. Developed from robust steel and other non corroding material the offered connectors are available with 20 per box quantity at a competitive price.

Features:

• Erosion resistant
• 1/4" bspt (m) thread
• Precision engineered

Applications:

• Suitable for quickly connecting and disconcerting
• Works best for pneumatic tools and airlines hose of 8mm OD

We have complete allegiance in manufacturing and supplying quality tested range of Calipers. We have developed an extensive range of calipers which includes both digital and dial calipers. Widely trusted for its superior calibration the offered instruments are developed using machine-grooved thumb-roll mechanism and position lock to ensure adjustment. Further, our offered range of calipers feature hardened steel fabrication and can be ordered from us at the market leading price.

Features:
 

• Easy to operate
• Precision ground jaws
• Wear resistant

Applications:
 

• For measuring in inches and metrics
• Best for metal fabrication

With the aid of our highly experienced professionals, we are instrumental in manufacturing and supplying Depth Gauges.  Owing to the technological advancements we are capable of developing best in class digital and ruler type depth gauges. Fabricated using quality approved grade of hardened and tempered steel the offered gauges are highly durable. Further, our prestigious clients can avail the application specific depth gauge from us at the best price in the industry.

Features:
 

• Light in weight
• Rust resistant
• Optimum accuracy
• Stands freely

Product Details:

Our pressure gauges (mechanical pressure measuring instruments) for gauge, absolute and differential pressure have been proven millions of times over. For the optimal solution for the widest range of applications, there is a choice of measuring systems in Bourdon tube, diaphragm element and capsule element technologies. The pressure gauges cover scale ranges from 0 … 0.5 mbar to 0 … 6,000 bar and indication accuracies of up to 0.1 %. For the various requirements in industrial and process instrumentation there are pressure elements from copper alloys, stainless steel or special materials.

Robust construction,
mechanical dial indicator 
with bottom plunger
Furnished with lug-on 
centre back
Each revolution is 
indicated by a revolution 
counter
8 mm stem diameter for 
metric models and 3/8" 
for inch sizes
Available in inch & metric 
models
Meets AGD specifications